Original Bedienungsanleitung FUXTEC FX-MT152/-MT152E/-MT252_de_en_fr_ita_rev18
60
Intended use and general safety instructions
This device may only be used with the scythe attachment for mowing or
trimming grass, weeds, and undergrowth. The hedge trimmer attachment is to
be used exclusively for trimming hedges, the branch saw attachment is to be
used solely for delimbing and trimming tree crowns.
Never use it for other purposes, as this can cause serious injuries!
Correct safety instructions must be followed. DO NOT EXPOSE YOURSELF OR OTHERS
TO DANGER. Follow these general safety instructions:
●
Always wear safety glasses for your eyes. Long hair must be tied back. Do not wear
loose clothing or jewelry that could get caught in moving parts of the device. Safe,
secure, non-slip safety shoes must always be worn. It is recommended that legs and
feet are fully protected to guard against flying objects during operation.
●
Check the entire device for loose parts (nuts, bolts, screws, etc.). Service or replace
them if necessary before using the device. Do not use accessories with this drive
head other than those recommended by the manufacturer. Otherwise, severe injury
to the user or bystanders and damage to the device may result.
●
Keep the handles free of oil and fuel.
●
Always use correct handles and the shoulder strap when cutting.
●
Do not smoke when mixing fuel or filling the tank.
●
Do not mix fuel in a closed room or near open fires. Ensure sufficient ventilation/air
circulation.
●
Mix and store the fuel mixture in a sealed container approved for such use according
to local regulations.
●
Never remove the fuel tank cap while the device is running.
●
Do not operate the device in closed rooms or buildings. Exhaust gases contain
dangerous carbon monoxide.
●
Do not attempt to adjust the device while running or carrying it. Always fix the
device on a flat, free surface
●
Do not use the device if it is damaged. Never remove any protective devices from
itself. Otherwise, the operator or persons may be seriously injured, and further
damage to the device may result.
●
Check the area to be cut and remove any objects that may be entangled in the
nylon cutting head or cutting blade. Also, remove all possible objects that the device
could throw around during cutting.
●
Never leave the device unattended.
●
Do not stretch out far forward. Always maintain a firm stand and balance. Never let
the device run while standing on a ladder or any other unstable standing position.
