12
CAUTION: The programming is only memorized in a volatile memory. This means that all freely
programmable programs are lost if you reset the controller.
Shortening a freely-programmable chaser:
Choose the freely-programmable chaser with the program button. Choose the desired projectors with the
projector select buttons. The projector LED has to be permanently on.
Press the write button, the chaser starts running and the two bars „--“ on the display start moving. Stop the
program by pressing the write button once more.
Erasing the volatile memory (RESET):
CAUTION: All of the 10 freely-programmable chasers are erased. The 20 pre-programmed scanner
programs cannot be deleted.
Turn the controller off, turn it on again. While the controller checks the LEDs, press the program button and
hold it until all LEDs start flashing. Press the write button in order to confirm the RESET.
TECHNICHAL SPECIFICATIONS CP16:
Power supply
230V/50Hz
Power consumption:
10VA
Fuse:
100mA slow blow
Sound input:
¼ " (6,3mm) Jack plug mono
Impedance:
15KOhm
DMX-Output:
¼ " jack plug stereo
DMX-512, channels 1-16
Plug connection:
Tip=Data+, Ring=Data-, Sleeve=Mass
Dimensions:
483 x 88 x 80 mm
Weight:
1.7 kg
Please note: All specifications are subject to change withour prior notice.
12/96
©
Errors and omissions excepted.
