FUTABA FDL01TU, Инструкция по эксплуатации

Страница: 66 / 83

52
RDA Disable Wireless Reception
Syntax
RDA{Local Station Address}
Local Station Address :
local station address
for 485 mode (000 to A22).
Response
P0 : command accepted
N0 :
command error
(Except
485 mode
)
Function
Disables wireless reception in the packet transmission mode .
The status when the modem is powered ON or reset follows bit 7 of REG22 .
Example
>
@
RDA
CR/LF
: disable wireless reception
<P0
CR/LF
: command accepted
>
@
REN
CR/LF
:
enable wireless reception
<P0
CR/LF
: command accepted
REG Reference and Set Memory Register
Syntax
REG[register number](: value) {;Local Station Address}
register number :
register
number to be set (00 to 27)
value : value to be set. Input 2 hexadecimal digits (0 through
9 and A through F) followed by the number radix
designator H.
Local Station Address :
local station address
for
485 mode
(000 to A22 ).
Response
xxx : current value (reference)
P0 : command accepted (setting)
N0 : command error (Except 485 mode )
N6 : memory register write error
Function
References or sets memory registers .
The current register value is referenced by omitting the “value” parameter.
Example
>
@
REG00
CR/LF
: reference the contents of register 00
<01H
CR/LF
: displays current value
>
@
REG00 : 023
CR/LF
: set value of memory register 00 to 023 (decimal)
<P0
CR/LF
: command accepted
Notes
The register can be rewritten sequentially. However, to make its parameter valid
after rewriting it, re-supply the power, reset the modem or use
RST command
.