FUTABA FDL01TU, Инструкция по эксплуатации

Страница: 3 / 83

iii
II
Important Safety Information
The list of dangers, warnings and cautions in this section contain important information that
will help ensure safe operation of the system. Please read carefully and understand all of
these items. All installers, operators and maintenance personnel should read and understand
this information before installation, use, or maintenance of the FDL01TU system.
The FDL01TU system by itself is not inherently dangerous.
HOWEVER, WHEN THE
FDL01TU IS CONNECTED TO OTHER EQUIPMENT FOR THE PURPOSE OF
CONTROL, SAFETY AND ALL POSSIBLE ASSOCIATED DANGERS MUST
ALWAYS BE GIVEN THE UTMOST CONSIDERATION DURING SYSTEM
INTEGRATION, DESIGN, INSTALLATION, AND USE.
The FDL01TU system may be used in virtually unlimited applications. Many of these
associated systems can, by themselves, pose a mechanical, electrical or other hazard to
operators and other persons or equipment. To address all possible applications and
associated safety hazards in this manual would be impossible. The warnings below and
throughout this manual give information that will allow safe installation and use the modem
system applications. If you have questions regarding the safety of your specific application,
please contact the appropriate people for help. Your Futaba sales representative,
representatives of the equipment being controlled, and the technical support staff at local
branch of Futaba Corporation are among those who can provide assistance with your safety
concerns.
The following warnings are included in the lists that follow but warrant repetition
here:
In installations where the FDL01TU system is used to control motion or operation of
potentially dangerous equipment, it is imperative for safety that all operators and installers
be thoroughly trained in the normal function of that equipment before attempting to control
it remotely with the FDL01TU system.
To help ensure safe operation of the equipment, the FDL01TU system must be connected
so that it will operate in a fail-safe way. In other words, the equipment being controlled
should stop or return to its safest state in the absence of a control signal or total loss of RF
transmission from the FDL01TU system. Our system uses one of the most reliable methods
available to transmit data using radio signals. Many factors can affect a radio signal that
may block it or interfere enough to disrupt regular transmission. Because of this, equipment
motion or dangerous electrical current, for example, that continues during a loss-of-signal
condition could be very dangerous.