Furuno TZTL12F, Руководство по установке

Страница: 49 / 67

3. HOW TO SET UP THE EQUIPMENT
3-15
Motion sensor menu
Note: Motion sensor setup is not required if [Fish Finder Source] in the [Sounder]
menu is set to [Internal].
When you tap [Transducer Setup] from the [Sounder] menu, the [Motion Sensor]
menu is shown beneath the [Transducer Setup] menu. If the satellite compass SC-30
or SC50/110 is connected, set the distance between the antenna unit (or sensor) of
the satellite compass and transducer (high and low if connected) here.
Menu item Description
Options
(setting range)
[Motion Sensor
Type] Select the sensor connected to you NavNet TZtouch2 unit. [SC30],
[SC50_SC110]
[Antenna Posi-
tion Bow/Stern
HF (LF)] Set the distance from the antenna unit to the transducer in
the bow-stern direction. If the transducer is located on the
fore side, set a positive value. [-99.9] to [+99.9]
[Antenna Posi-
tion Up/Down HF
(LF)] Set the distance from the transducer to the antenna unit in
the vertical direction. [-0.00] to [+99.9]
[Antenna Port/
Starboard HF
(LF)] Set the distance from the antenna unit to the transducer in
the port-starboard direction. If the transducer is located on
the starboard side, set a positive value. [-99.9] to [+99.9]
SC-30/50/110
Up/Down Up/Down
Bow/Stern for HF Bow/Stern for HF
Bow/Stern for LF Bow/Stern for LF
Port/Starboard for HF Port/Starboard for HF
Port/Starboard for LF Port/Starboard for LF
HF Transducer HF Transducer
LF Transducer LF Transducer