manualshive.com logo in svg

Furuno TZTL12F, Руководство по установке

Поделиться
Скачать
Furuno TZTL12F Скачать руководство пользователя страница 48

3.  HOW TO SET UP THE EQUIPMENT

3-14

When [Transducer Setup Type] is set to [TDID]

[Transducer Power LF]

Set the transmission power for low frequency.

Note 1: 

This menu item is available only for 

DFF1, DFF1-UHD, BBDS1 and internal fish 
finder users.

Note 2: 

For DDF1-UHD users, when the con-

nected transducer TDID is not supported by the 
DFF1-UHD, the setting is fixed as [1000].

[600], [1000]

[Band Width (LF)]

Set the bandwidth for low frequency.

Note: 

This item is only available for DFF3 

users.

[10] to [100]

Menu item

Description

Options 

(setting range)

[High Frequency]

Set the frequency (kHz) for the high frequency transducer.

Note: 

This item is displayed when the connected transducer has 

an unsupported TDID.

[Transducer Power HF]

Set the transmission power for high frequency.

Note 1: 

This item is only available for DFF1, 

DFF1-UHD, BBDS1 and internal fish finder 
users.

Note 2: 

For DDF1-UHD users, when the con-

nected transducer TDID is not supported by 
the DFF1-UHD, the setting is fixed as [1000].

[600], [1000]

[Low Frequency]

Set the frequency (kHz) for the low frequency transducer.

Note: 

This item is displayed when the connected transducer has 

an unsupported TDID.

[Transducer Power LF]

Set the transmission power for low frequency.

Note 1: 

This item is only available for DFF1, 

DFF1-UHD, BBDS1 and internal fish finder 
users.

Note 2: 

For DDF1-UHD users, when the con-

nected transducer TDID is not supported by 
the DFF1-UHD, the setting is fixed as [1000].

[600], [1000]

Menu item

Description

Options 

(setting range)

Содержание TZTL12F




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды