5. RC1815/RC1825 Equipment Setup
5-4
5.3 Felcom 15
Refer to the
Installation Manual, Felcom 15
5.3.1 General
1) Insert a good, formatted, floppy disk into the Terminal.
2) Power up the Felcom 15, the status screen should show OK indications
and the GPS should indicate
3D
.
5.3.2 IMN Input
(Refer to Pg. 19 of the
Installation Manual, Felcom 15
)
1) Press the
[F8]
key, using the down arrow key, highlight
IMN
and then
press the
[Enter]
key.
2) Type in the IMN and press the
[Enter]
key.
3) Press the
[Esc]
key. The screen will now prompt
Update
.
Select
Yes
and press the
[Enter]
key.
4) Press the
[Esc]
key until you return to the status screen.
5.3.3 External Equipment
(Refer to Pg. 20 of the
Installation Manual, Felcom 15
)
The Felcom 15 has been programmed for use with the following remote boxes:
1) IC-305 Distress Alert Unit
2) IC-306 Alarm Unit
Unless a DMC-5 or additional boxes are added no changes are necessary.
To change these settings, refer to Pg. 4 of the
Dealers Manual.
Содержание RC18 Series
Страница 1: ...FURUNO USA A3 GMDSS CONSOLE MODEL RC18xx Series...
Страница 2: ...FURUNO USA IME GMD 40Z...
Страница 9: ...A3 GMDSS Console Mechanical Drawing 2 4...
