6. RC1840 Equipment Installations
6-4
6.4 Felcom 15 Installation
Refer to
Installation Manual, Felcom 15
6.4.1 IC-215 Communications Unit/Display
1) Mount the IC-215 in the front, desktop area, of the console on the right side.
Using the four tapping screws provided.
(Refer to Pg. 2-3, the
RC1840 Mechanical Layout
and Pg. 8 of the
Installation Manual
)
2) Connect the cables for the
Felcom 15 Printer
,
Keyboard,
Felcom 15 Junction Box
and
Felcom 15 Power
. These cables have
been installed and labeled within the console.
3) Install the IC-305, Distress Alert/Received Call Unit, on the bridge.
Wire this to the IC-315 Junction box using Belden 85164 or equivalent.
(Refer to Pg. S-6, the
Felcom 15, IC-315 Junction Box Connections
)
4) Install the IC-306, Alarm Unit, near the console.
Wire this to the IC-315 Junction box using Belden 85164 or equivalent.
(Refer to Pg. S-6, the
Felcom 15, IC-315 Junction Box Connections
)
6.4.2 IC-115 Antenna Unit
1) Install Antenna Unit, IC-115, (refer to the
Installation Manual
). Make sure
that the Antenna Unit is properly grounded and that all connections are properly
sealed. Route the antenna cable to the IC-215 and connect it to the
ANT
port.
(Refer to Pgs. 1 through 7 in the
Installation Manual, Felcom 15
)
Содержание RC18 Series
Страница 1: ...FURUNO USA A3 GMDSS CONSOLE MODEL RC18xx Series...
Страница 2: ...FURUNO USA IME GMD 40Z...
Страница 9: ...A3 GMDSS Console Mechanical Drawing 2 4...
