7. RC1840 Equipment Setup
7-7
7.6 FM-8500
Refer to the
Installation Manual, FM-8500
7.6.1 General
This setup must be performed on both FM-8500’s.
1) Power up the unit.
2) Press the
[1] (Position)
key. The Longitude/Latitude and UTC time should
be displayed. This NMEA information is supplied by the Felcom 15. If it is
not displayed check the NMEA cables and connections.
(Refer to Pg. S-6, the
Felcom 15, IC-315 Junction Box Connections
)
7.6.2 MMSI Setting
1) Press the
[SELECT]
key, the
Setup menu
appears.
2) Press the
[9]
key, the
System menu
appears.
3) Using the arrow keys, select
ID
and press the
[ENT]
key.
4) Enter the vessel’s MMSI number and the
[ENT]
key to accept.
7.6.3 DSC Settings
1) Using the arrow keys, select
DSC
and press the
[ENT]
key.
2) Press the
[1]
key to select
CH70,
then press the
[ENT]
key.
When setting up VHF 2, select VHF instead of CH70.
TEST VHF CH 70
System menu < >
V P
ID
DSC RT CH PO
System menu < >
V P
ID
DSC
RT CH PO
Содержание RC18 Series
Страница 1: ...FURUNO USA A3 GMDSS CONSOLE MODEL RC18xx Series...
Страница 2: ...FURUNO USA IME GMD 40Z...
Страница 9: ...A3 GMDSS Console Mechanical Drawing 2 4...
