Furuno GS-100, Руководство оператора

Страница: 56 / 157

6. BERTHING DISPLAY
6-2
3-axis speed data and NAV data
*1: Requires heading data. If there is no heading data,“--” appears and the ▲mark
and “NSEW” (indicates the azimuth) are not shown.
*2: ROT: Heading data is required only for [EXT HDG].
*3: These data can not be displayed in the GS-100.
*4: Ground tracking: Green, Water tracking: Blue
Position
Berthing
line
Time
Tracking mode monitor*
4
Tracking mode
Heading *
1
ROT source*
2
,
ROT
Doppler sonar*
3
SOG(STW)
Doppler sonar* 3
COG
Current* 3 (tide) speed,
direction
Wind reference*
3
wind speed
wind angle
Depth
Name of berthing line
Predicted
position marker
(purple)
Speed vector
(black dashed line)
Range/Display orientation
(N UP, H UP)
3-axis speed display
Transverse speed at
reference point
Longitudinal speed
Transverse speed at
reference point
Past position marker*
1
Ground tracking: light green
Water tracking: light blue
Track*
1
(solid line)
Stern track: black
Ref. pos. track: green*
4
Own ship marker*
1/4
(current position)
The own ship marker indicates current position.
The marker is green for ground tracking and blue
for water tracking. The marker is scaled
according to ship length and width, set on the
[ShipSize•ANT/CALC-SPD POS] menu (see
“Ship size and antenna position” in paragraph
8.4.7)*. If the range and dimensions of the ship
are as shown below, the marker is shown with
concentric circles.
Range x 8
≥ Ship’ s length x 30, or Width x 52
Own ship marker
Speed Vector (Shows predicted
ship position at end of selected
time interval.)
Heading Line
(Indicates your heading.)
Beam Line
CCRP
(Consistent Common Reference Point)
Own ship marker
*: [GGA], [HDT] and [ROT] must be selected
on the [I/O] - [Output Data1] - [Sentence]
menus (see paragraph 3.9.1).