manualshive.com logo in svg

Furuno FCV-38, Руководство по установке

Поделиться
Скачать
Furuno FCV-38 Скачать руководство пользователя страница 54

3.  INITIAL SETTINGS

3-20

Reset the external sounder settings

1. Move the cursor to the external echo picture on sub monitor, and right-click on the 

screen.

2. Select [Service] from the menu, then press and hold the [OK] button for approxi-

mately ten seconds. The [Service] menu is expanded.

3. Select [Restore Default Settings] at the left bottom corner of the window.

The message window appears as shown below.

4. Select [Yes] to restart the system.

Reset the main system advanced settings

1. Select the [Advanced Settings] icon (

) from the InstantAccess bar, and se-

lect the [Advanced Settings] icon (

) from the expanded menu bar.

2. Select [Service] from the menu and press and hold the [OK] button for approxi-

mately ten seconds. The [Service] menu is expanded.

3. Select [Restore Default Settings] at the left bottom corner of the window.

The message window shown above appears.

4. Select [Yes] to restart the system.

3.9

Retrofit from FCV-30

If the transceiver unit of the FCV-30 is connected to the processor unit of the FCV-38, 
the IP address of the FCV-30 must be changed. To change the IP address, the IP ad-
dress changing tool is required.

3.9.1

Required Tools and Device

• PC: Windows

®

 10 (64 bit)

•  upip.exe file: IP address changing tool. Install it on a PC (It can be installed on the 

Desktop). For this tool, contact your dealer.

• LAN cable

FCV-38[ver 0252473-xx.xx]

Содержание FCV-38


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды