manualshive.com logo in svg

Furuno FCV-38, Руководство по установке

Поделиться
Скачать
Furuno FCV-38 Скачать руководство пользователя страница 49

3.  INITIAL SETTINGS

3-15

2. Move the cursor onto the sub monitor and right-click on the screen.

The setting menu for external echo sounder appears.

3. Select the [Calibration] menu from the [System] menu.

The [Calibration] menu appears.

4. Set the calibration parameters referring to the table below:

5. Set the calibration parameters for bottom level and gain adjust from the [HF] or 

[LF] menu under the [Calibration] menu.

6. Select [OK] to close the menu.

Item

Setting values

Meaning

[Zero Line Rejection] [Off], 

[On] (default)

Turn the zero line (transmission line) on 
or off.

[Zero Line Area]

[m]: 1.4 to 3.0
[ft]: 4.5 to 9.8
[fm]: 0.7 to 1.6
[HR]: 0.9 to 2.0
[pb]: 0.8 to 1.8
(The minimum value 
is default.)

Adjusts the transmission line.

[Draft]

[m]: -9.0 to 30.4
[ft]: -30.0 to 99.9
[fm]: 0.7 to 1.6
[HR]: 0.9 to 2.0
[pb]: 0.8 to 1.8
(default: 0.0)

The default depth display shows the dis-
tance from the transducer.

[Fish Size]

[-80] to [100]
(default: [0])

Compensate for incorrect fish size indi-
cations (%).

[Sound Speed]

[200.0] to [2000.0]
(default: [1500])

Calibration for speed of sound (m/s).

Item

Setting values

Meaning

[Bottom Level]

[-40] to [40]
(default: [0])

Set the strength at which an echo is deter-
mined to be the bottom. Adjust this setting 
carefully as an excessively high setting may 
hide fish located near the seabed.

[Gain ADJ]

[-50] to [50]
(default: [0])

Adjust this setting if the gain is too high or too 
low, or the gain for the low and high frequen-
cies appears unbalanced.

Setting value (%)

-80
-75
-65
-50

+50

+100

Adjustment

1/5
1/4
1/3
1/2

x1.5

x2

Содержание FCV-38


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды