13
English
Operation
SIGNALS DURING OVEN SETTINGS
ONE SIGNAL:
Oven accepts the entry.
TWO SIGNALS:
Oven does not accept the
entry, please check and try again.
●
After a cooking program has finished,
the oven will sound beeps with END
showing on screen, press any pad
or open oven door to clear it before
setting another function.
●
During cooking, if press START/
STOP pad once, the program will be
paused, press, and then press RESET
pad, the program will be canceled.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time.
3. Touch CLOCK pad again.
NOTE:
This is a 12 hour clock. When
the oven is first plugged in or power
resumes, the display will show ENTER
CLOCK TIME. If you prefer not to have
the clock displayed, touch RESET.
SETTING THE OVEN TIMER
1. Touch TIMER.
2. Enter the amount of time by touching
the number pads.
3. Touch START/STOP.
NOTE:
The maximum countdown
time you can set is 99 minutes and 99
seconds.
●
Time countdown can be seen in
display for 5 seconds before clock or
cooking time is returned to display.
●
After the countdown time elapsed,
the buzzer will sound one beep.
●
Touch TIMER and then touch RESET
to cancel TIMER during timing
process.
SETTING A COOKING PROGRAM
A. One-stage cooking
1. Use the number pads to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
seconds.
2. If you want to set a power level other
than 100%, touch POWER, and then
use the number pads to enter the
power level. During cooking you can
check the power level by touching
POWER pad.
3. Touch START/STOP to start cooking.
Use digit to set a cooking power level:
Number Pad
Cooking Power
1,0
100%
9
90%
8
80%
7
70%
6
60%
5
50%
4
40%
3
30%
2
20%
1
10%
0
0%
B. Two-stage cooking
Some cooking requires different stages
of cooking at different temperatures.
1. SET STAGE 1: Follow steps 1 and 2 in
“One-stage cooking”. Do not touch
START/STOP.
2. SET STAGE 2: Touch COOK then enter
proper cooking time and (lower)
power level. (Most 2-stage recipes
use lower power for second stage.)
3. Touch START/STOP.