9
English
Installation
What’s in the Box
Make sure all the following items are
included in the packaging. If any item is
damaged or missing, contact your dealer.
●
Microwave Oven Body
●
Instruction Manual
●
Warranty Card
●
Trim Kit
*
–
Long Strip x 2
–
Short Strip x 2
–
Mounting Screws x 8
–
Metal Bracket x 2
*
For
model FMSM09-BL & FMSM09-MG
only.
Before Installation
1. Make sure that all the packing
materials are removed from the
inside of the door.
2. Check the oven for any damage, such
as misaligned or bent door, damaged
door seals and sealing surface,
broken or loose door hinges and
latches and dents inside the cavity or
on the door. If there is any damage,
do not operate the oven but contact
qualified service personnel.
3. This microwave oven must be placed
on a flat, stable surface to hold its
weight and the heaviest food likely to
be cooked in the oven.
4. Do not place the oven where heat,
moisture, or high humidity are generated,
or near combustible materials.
5. For correct operation, the oven
must have sufficient airflow. Do not
cover or block any openings on the
appliance. Do not remove feet on
which oven stands.
6. The appliance shall be only used on a
countertop over 3 feet (914mm) above
the floor.
7. Do not operate the oven without glass
tray, roller support, and shaft in their
proper positions.
8. Make sure that the power supply
cord is undamaged and does not run
under the oven or over any hot or
sharp surface.
9. The socket must be readily accessible
so that it can be easily unplugged in
an emergency.
Microwave Oven Installation
Cabinet Preparation
1. Select a suitable place that is not
susceptible to moisture.
2. Mark and cutout an opening in the
cabinet according to the dimensions
outlined in the table. (Fig. 1)
NOTE:
If a range oven is installed
under the microwave oven, 1 inch
minimum clearance must be
reserved from the bottom of the
microwave oven to the top of the
range oven, refer to E dimension.