ATR833S / P/N 833S-(Cxxx)-(Cxxx)
Operation and Installation
33
Document-Nr.: 01.142.010.71e / Revision:1.03
3.10 Master Reset - Reset to Factory Settings
With the following procedure all configurations are reset to the factory
settings. Switch off the device. Press
MEM
and
DW
button
simultaneously and switch the unit on with these buttons pressed.
After the start display the following display appears
Select Reset
– Yes with the
VOL/SEL
turn knob
The reset process is activated by pressing the SET button. The reset is
confirmed with "DONE" and the transceiver automatically restarted
The reset process is activated by pressing the SET button. The reset is
confirmed with "DONE" and the transceiver automatically restarted
