ATR833S / P/N 833S-(Cxxx)-(Cxxx)
Operation and Installation
13
Document-Nr.: 01.142.010.71e / Revision:1.03
Respectively
A push on the swap button
interchanges the newly set standby
frequency and the former active frequency and leaves the memory list
menu.
If no input is done for 10 seconds the device returns to the standard
view.
2.4.4 Recall a Frequency from the List of the 10 Last Used
The radio automatically keeps track of the last 10 used active
frequencies. To access this list, press
MEM
twice and select one of the
10 entries listed with the
VOL/SEL
turn knob. With a press on the
SET
button the selected memory entry substitutes the former standby
frequency. A press on the SWAP button
substitutes the active
frequency and terminates the memory selection.
Range 1 - 10
8 digits A-Z / 0-9
