ATR833S / P/N 833S-(Cxxx)-(Cxxx)
Operation and Installation
15
Document-Nr.: 01.142.010.71e / Revision:1.03
Every memory position can also store an identifier with up to 8 digits next
to the frequency.
To add a name go to the selected memory
entry. To add the name, follow the next
steps as for step 3 or step 4, above
5. Change to name entry:
a long press of the Cursor button
enables the entry of a name
A
1 2 4 . 3 5 0
6. Enter the name:
By changing the selected character with
FREQ
, and advancing the selection
with ►, in the same way as manually
entering a standby frequency.
K O N S T A N Z
1 2 4 . 3 5 0
7. Store the name:
The new entry is stored with the entry
of the last digit. The name is now
shown in the frequency list.
K O N S T A N Z
1 2 4 . 3 5 0
To exit the frequency list press
MEM
twice or wait 10 seconds until time-
out.
2.4.6 ATR Frequency-Tool
The ATR Frequency Tool supports the ATR833S from version 1.3. With
the tool you can manage the frequency memory of the ATR833S, i.e.
frequencies can be added, edited and deleted. The frequency list can be
stored as a file.
The ATR Frequency Tool can be downloaded from the f.u.n.k.e.
AVIONICS homepage in the Service Area under Info / Download.
2.5 Basic Settings
To choose between the following settings, use the
SET
button:
1. VOL Volume (chosen by default)
2. SQL Squelch (noise suppression)