ATR833S / P/N 833S-(Cxxx)-(Cxxx)
Operation and Installation
24
Document-Nr.: 01.142.010.71e / Revision:1.03
3 CONFIGURATION
A very long press of
SET
(5 seconds) gives access to the configuration
menu (Setup). The configuration menu is used for fundamental settings.
To choose between the following settings, use the
SET
button:
1.
SPACING
Channel spacing
2.
DISPLAY
Display darkening (power save mode)
3.
PTT SLCT
PTT button selection
4.
DUOWATCH
Dual Watch muting
5.
EXTAUDIO
Behaviour of the external audio input
6.
MIC L
Microphone sensitivity left
7.
MIC R
Microphone sensitivity right
8.
MICL TYP
Microphone type left
9.
MICR TYP
Microphone type right
10.
AUTO ON
Automatic power on with cockpit power
11.
FW
Firmware version
12.
SW
Software version
In the configuration menu the first line shows the menu name and the
adjustment value is shown in the second line.
As with the basic settings, a return to the standard display from each
menu point is carried out automatically 10 seconds after the last input
(time-out), by frequency input or by a long press of the
SET
button.
At the end of all menu items, you return to the default display.
The selection of the values is done with the
VOL/SEL
turn knob.
3.1 CHANNEL SPACING
With this setting, the ATR833S can be configured to limit frequency
selection to 25 kHz channels only. This can be used to speed up the
manual frequency input in areas where no 8.33 kHz channel spacing is
used.
See chapter 0 for further information on manual frequency input.
Using the
VOL/SEL
turn knob the following options can be selected in
this submenu:
