WRxxxE20-‐EN2 Application Manual
9
Energy Saving Applications
Door and Window Switches
(WSDSE to WRxxxE20-‐EN2)
•
WR activates with closed command from WSDSE and deactivates with open command
from WSDSE.
•
WSDSE retransmits contact state every 70-‐140 seconds.
•
Relay output state is stored at power loss. Relay output initiates in last stored state when
power is restored. (See *note at end of document)
•
In this mode, WR’s can be paired with up to 30 WSDSE. It is recommended to use Alarm
mode if more than one WSDSE is learned.
•
Can be used with any devices with Enocean Equipment Profile A5-‐30-‐02 or D5-‐00-‐01.
•
Optional modes:
Repeater (see page 11)
Alarm (see page 11)
Delay (see page 12)
WSDSE Learn Procedure
1.
Apply power to WR and allow WSDSE to charge.
2.
Press and hold LRN button on WR for ½ second.
3.
LED will blink slowly.
4.
Press and release TCH button on WSDSE to transmit teach telegram.
5.
LED on WR will stay ON for 4 seconds indicating telegram reception..
6.
To learn more WSDSE, repeat steps 2-‐5.
Содержание WR E20-EN2 Series
Страница 1: ...B1667A Code Version 1 x...
