WRxxxE20-‐EN2 Application Manual
8
Occupancy Detection
A.
Manual ON – Auto OFF (Occupancy Sensor [Enocean Equipment Profile A5-‐07-‐01] and
WSE to WRxxxE20-‐EN2)
•
Relay activates when ON is pressed on switch. Relay deactivates when OFF is pressed on
switch or 30 minutes after last ON command from Occupancy Sensor.
•
It may take up to 2 minutes for the WR to respond to the Occupancy Sensor immediately
following Learn-‐in.
•
Optional modes:
Repeater (see page 11)
Manual ON – Auto OFF Learn Procedure
1.
Apply power to WR and allow Occupancy Sensor to charge.
2.
Press and hold LRN button on WR for ½ second.
3.
LED will blink slowly.
4.
Press and release TCH button on Occupancy Sensor.
5.
LED on WR will stay ON for 4 seconds indicating telegram reception.
6.
Press and hold LRN button on WR for ½ second.
7.
LED will blink slowly.
8.
Press and release rocker switch you are learning three times quickly.
9.
LED on WR will stay ON for 4 seconds indicating telegram reception.
10.
To learn another switch, repeat steps 6-‐9.
B.
Occupancy (Occupancy Sensor [Enocean Equipment Profile A5-‐07-‐01] to WRxxxE20-‐EN2)
•
Relay activates when occupancy is detected and deactivates 30 minutes after last
detection of occupancy.
•
It may take up to 2 minutes for the WR to respond to the Occupancy Sensor immediately
following learn-‐in.
•
Optional modes:
Repeater (see page 11)
Occupancy Only Learn Procedure
1.
Apply power to WR and allow Occupancy Sensor to charge.
2.
Press and hold LRN button on WR for 1/2 second until LED begins to flash.
3.
LED will blink slowly.
4.
Press and release TCH button on occupancy sensor.
5.
LED on WR will stay ON for 4 seconds indicating telegram reception.
Содержание WR E20-EN2 Series
Страница 1: ...B1667A Code Version 1 x...
