Functional Devices WR E20-EN2 Series, Руководство по применению

Страница: 12 / 14

WRxxxE20-­‐EN2 Application Manual
11
Optional Modes
Repeater Mode
•
Activating repeater mode allows relay to repeat signal from other Enocean devices within
range.
•
Relay will allow signal to be repeated up to two times.
Enabling Repeater Mode
1. Apply power to WR.
2. Press and hold LRN button on WR for ½ second.
3. LED will flash slowly.
4. Press and hold the CLR button for 3 seconds until LED blinks twice indicating repeater
mode is enabled.
Disabling Repeater Mode
1. Apply power to WR.
2. Press and hold LRN button on WR for ½ second.
3. LED will flash slowly.
4. Press and hold the CLR button for 3 seconds until LED blinks three times indicating
repeater mode is disabled.
Alarm Mode
•
Activating alarm mode forces all learned contact switches, such as WSDSE or WT24E2, to
transmit a CLOSED telegram before relay will activate. Relay will deactivate if any contact
switch transmits an OPEN telegram.
Enabling Alarm Mode
1. Apply power to WR.
2. Press and hold LRN button on WR for ½ second.
3. LED will flash slowly.
4. Press and hold LRN button on WR for 3 seconds until LED pattern changes.
5. LED pattern will be FLASH, FLASH, OFF (2 flashes).
6. Press and hold the CLR button for 3 seconds until LED blinks twice indicating alarm
mode is enabled.
Disabling Alarm Mode
1. Apply power to WR.
2. Press and hold LRN button on WR for ½ second.
3. LED will flash slowly.
4. Press and hold LRN button on WR for 3 seconds until LED pattern changes.
5. LED pattern will be FLASH, FLASH, OFF (2 flashes).
6. Press and hold the CLR button for 3 seconds until LED blinks three times indicating
alarm mode is disabled.