5
EN
Installing the Batteries
1)
Open the battery compartment cover.
2)
Insert “R6” penlight batteries into battery compartment
in the direction as indicated by the polarity (+/–)
markings. Batteries installed with incorrect polarity may
damage the remote unit.
3)
Close the cover.
4)
Push the cover on its top side until it clicks in order to fit
the cover completely to the compartment.
Switching TV / DVD Mode
• To switch TV mode to DVD mode, press
PLAY
B
, insert a
disc or press
EJECT
A
on the unit.
• To switch DVD mode to TV mode, press
INPUT SELECT
or
/
(prog.)
.
REAR PANEL
38.
DIGITAL AUDIO OUT (COAXIAL) jack (DVD only)
Connect to an amplifier with digital input jacks such as
Dolby Digital decoder, etc. Use a commercially available
coaxial cable.
39.
RGB scart jack
AV-IN1: Connect to the scart jack of an external devices
or set top box.
40.
S-VIDEO input jack
AV-IN2: Connect to the S-video output jack of a video
camera or VCR using the S-video cable (not supplied).
Note:
The S-VIDEO jack is given priority over the
VIDEO jack.
41.
VIDEO input jack
AV-IN2: Connect to the video output jack of a video
camera, VCR or video game.
42.
AUDIO L/R input jacks
AV-IN2: Connect to the left/right audio output jacks of
a video camera, VCR or video game.
Note:
The AUDIO L (input) jack is for mono input.
The sound is heard from both speakers. Use this jack for
monaural audio equipment to be hooked up.
43.
Aerial input jack
Connect to an antenna, cable system or satellite system.
44.
Headphone jack
Connect headphone (not supplied) for personal
listening.
Note:
Do not connect earphones that have an L-shaped
plug. The plug may interfere with the cabinet.
Table Stand
Adjust the stand to change the angle of the unit (-5°~10°).
42
43
44
39
38
41
40
5˚ 10˚
L4670EA(EN).fm Page 5 Tuesday, May 15, 2007 5:36 PM
