FUNAI BH2-M200, Руководство пользователя

Страница: 64 / 88

64
EN
Settings Recording Bilingual
Recording Audio Main Selects either “Main” or “Sub” when dubbing a title
with bilingual audio to...
- a video mode or +VR mode DVD.
- a VR mode DVD when “Recording Audio Select
(XP)” is set to “PCM”.
• When recording to HDD or Blu-ray Disc™, both
“Main” and “Sub” will be recorded regardless of
your setting here. And you can choose the
desired audio format as you playback later.
Sub
External Input
Audio Stereo When the external input audio is a bilingual
broadcast, you can choose “Stereo” or “Bilingual”
as the recording audio.
• This setting is only for recording external input
(“AV2”).
• See also “Bilingual Recording Audio” above.
Bilingual
Video Colour
System Auto Lets you select the appropriate colour system to
match your TV.
“Auto”:
The video colour system will be set automatically
according to the recording material.
“PAL”:
The video colour system will be set to PAL.
“SECAM”:
The video colour system will be set to SECAM.
• During recording, when a signal other than PAL
or SECAM is detected, an error message
appears on the screen and recording will be
paused. Recording will be resumed when a PAL
or SECAM signal is detected.
• Regardless of the setting here, recording colour
system is fixed to PAL.
• When PAL is selected, but the input signal is
SECAM or vice versa, the colour will not be
recorded correctly.
PAL
SECAM
Clock Clock Setting Press [ENTER
\
OK] so that the entry fields will be
available. Enter the date (day / month / year) and
time using
[
K
\
L
] or [the Number buttons] , then
press [ENTER
\
OK] .
• Use [
s
\
B
] to go back and forth among the
fields.
• Your clock setting will be lost if either there is a
power failure or the unit is unplugged for more
than 30 seconds.
• If “Auto Clock Setting” is set to “On” you cannot
select “Clock Setting”.
Auto Clock Setting On Lets the unit adjust the clock automatically by
referring to the DVB time signal.
• Make sure “Initial Setting” (page 20) or “Auto
Tuning” (page 58) has been performed.
• The unit adjusts the clock at 1:00 a.m. only
under the condition when the unit is in the
standby mode. Adjusting takes about a few
minutes.
Off
Category Menus / Options Descriptions
DVD-RW DVD-RW DVD-RW
Video
DVD-R DVD-R DVD-R
DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
HDD HDD HDD BD-RE BD-RE BD-RE
BD-R BD-R BD-R DVD+RW DVD+RW DVD+RW
DVD+R DVD+R DVD+R
Clock Setting
- - : - -
( - - - ) - - / - - / - - - -
E4V21ED_EN.book Page 64 Friday, June 3, 2011 2:07 PM