16
EN
Connecting to a TV (Basic
Connection)
Disconnect the power cords of the devices from
the mains plug.
By referring to the following sections, make the
necessary connections.
After making all the connections, plug in the
power cords of the devices to the mains plug,
and select the appropriate input channel on
your TV.
Using the AV1 (TV) scart socket, or AUDIO/VIDEO
OUT jacks
Note
• If your TV does not have a scart socket, use a scart/RCA
cable, or scart adaptor.
• Connect this unit directly to the TV. If the AV cables are
connected to a VHS, pictures may be distorted due to the
copy protection system.
• Use a commercially available adaptor if the video input jacks
of your TVs or monitors are the BNC type.
Using the HDMI OUT Jack
After making connection...
Refer to “HDMI Video Resolution” setting in the “Function
Setup” table on page 65, and select the desired resolution to
output.
Refer to “HDMI / COAXIAL Audio Output” table on page 17 to
see how the digital audio is output from the HDMI OUT /
COAXIAL (digital audio out) jack.
• HDMI outputs the video / audio signals without converting to
analogue signals.
• No audio connection is required.
• Use an HDMI cable with the HDMI logo (a certified HDMI
cable) for connection.
Connections
Antenna Connection
Audio / Video Connection
Standard Quality
1
2
3
2
1
RF cable
(not supplied)
RF cable (supplied)
Cable
Signal
or
To Aerial jack
Antenna
Scart cable
(not supplied)
Audio/video cable
(not supplied)
OR
Scart/RCA cable
(not supplied)
Scart adaptor
(not supplied)
High Quality
HDMI IN
TV
To HDMI
input jack
this unit
HDMI cable (not supplied)
Note for HDMI Audio
E4V21ED_EN.book Page 16 Friday, June 3, 2011 2:07 PM
