Depth
(picture N1, N2)
Loosen bolt
38
and
place
the knee supports at the required depth; tighten bolts
again
.
Angle and lateral adjustment
(pict N1, N2)
Loosen bolts
39
and position the supports as required; tighten the bolts again.
Shape
It is possible to customize the support by shaping the soft part.
H-HARNESS
45° belt with braces
to fix
the trunk and the pelvis to the seating unit in a comfortable way.
The whole belt can be washed as per instructions on the label.
Fit on the seating unit
(pict O1-O2)
Remove the headrest and bolts
O
and
T
; then take off the plastic cover.
Insert and fix the higher harnesses in the suitable holes
X
of the seating unit.
Fit
in
the plastic cover and bolts
O
; then place again headrest and bolt
T
; tighten all bolts.
Position the braces on the seating unit.
Fix the lower harnesses (already set on the seat) in holes
40
of the braces.
Removal from the seating unit
Carry out opposite process to the fitting operations.
49
O
T
Abb. O1
X
X
40
Abb. O2
Pict O1
Pict O2
Содержание Mitico
Страница 1: ...User manual N 2 2004...
Страница 2: ...2 22037 Pontelambro Co P za Puecher 2 Italia tel 39 0 31 3356811 fax 39 0 31 622111 www fumagalli org...
Страница 5: ...5...
Страница 64: ...64 is distributed by...
