Fumagalli Mitico, Руководство пользователя

Страница: 46 / 64

Footplates
Angle adjustment
(pict M10)
Loosen bolt 34 and angle the single footplate as required. Tighten the bolt.
Height (pict M8)
Loose bolt 31 and place the single footplate at the required height; strongly tighten
the bolt.
Adduction (pict M8)
Loose bolt 30 and place the single footplate as required; strongly tighten the bolt.
Inwards-outwards rotation (pict M10)
Loose bolts 33 under the footplates and set as required; tighten the bolts again.
46
WARNING
D o not position the child stand on the plates: they are not
designed to support heavy weights.
It is possible to achieve more or less adduction by inverting
the sliding supports. Swap 30B from right to left side and
refit onto 30A.
30B
30A
30B
Abb. M9
33
34
33
Abb. M10
Pict M9
Pict M10