Fumagalli Mitico, Руководство пользователя

Страница: 26 / 64

“L’ALTALENA” Swing Frame (pict B24)
The frame allows the seating unit to swing.
See pages 8-9 for seating unit fitting and removal.
Frame setting
For an easier and faster frame setting, all parts have been given a
corresponding letter, the same as on the correspondent screws and joints.
Mount the elements of the frame by assembling the parts with each other.
All parts to be assembled are indicated by double letters that, if correctly
followed, they will be next to the other (A-A, B-B etc.).
For an easier mounting, lay the first arch to the wall; put the tube into the
higher hole, and the frame in the holes below; then take the second arch
and set all parts like the previous one; fix them with their own bolts.
At this point, the structure is ready and the swinging part has to be mounted:
with bolts into the bearings fix the frame to the central part of the structure.
DO NOT FORGET TO USE, AT THIS POINT, A PARTICULAR
LOCKING DEVICE TO FIX THE BOLTS SECURELY.
Check the correct working of Swing Frame.
26
ATTENTION
All parts have a slight backlash, thus there is the possibility of more
difficulties in putting them into place; use a rubber hammer to prevent
from varnish damaging.
Pict B24