Fulling DZB200J, Руководство пользователя

Страница: 14 / 47

DZB 200series i nvert er funct ion para meters, which are grouped by func ti ons, have F0-F0 total 7 groups.
Each functi on group includes a numbe r of function codes, which adopt s t hree-stage menu, for i nstance,
means the 8th function code of F4th function.
For the convenience of setting function code by us ing operation panel, the function group numbe r is
corresponding to Stage 1 menu, the function code is cor responding to Stage 2 menu and the function code
parameter is corresponding to Stage 3 menu.
1. The column of function table i s des cribe d as follows:
The 1st column Function Code is the functi on parameter group a nd parameter code.
The 2nd column Name is the complete name of the function parameter.
The 3rd column Set ting Range is the effective setting value range of the funct ion parameter,
shown on the operation panel LC D.
The 4th Default is the ori ginal factory setting value of this funct ion parameter.
The 5th Modifi cation is the modification performance of the function parameter (i.e. whether
or not it is permitted to modify and the modification condit ions ), explained as follows ,
: indicates that the setting value of t his parame te r c an be modified when t he inverter is
ei ther in stop or operating status ;
: means that the setting value of this parameter cannot be modified when the inverter is in
operati ng s tatus;
: means t hat t his parameter is a test value which cannot be modi fied.
## :means that thi s parameter only can be modifi ed by manufacturer.
(Inverter ha s done the automatic det ection restriction to the modification performance of each parameter,
hel ping user to prevent mis-modification.)
The 6th column Serial No is t he number of function code at the storage inside.
2. Default indicates the value of the function code after it is refreshed while doing the mani pulation of
rest oring the fact ory parameters; but the actually detected parameters or record values ca nnot be r efreshed.
3.In order t o e ffectivel y prot ec t the parameters , the inverter provides the crypt oguard for the funct ion code.
After the us er's pass word is set up (i.e. user's passw ord F3.00 parameter is not 0), when the user press PRG
button to enter function code edit status, the system firs t ent ers the user's pas sw ord verifica ti on s tatus,
displaying ----- , and the operator must input correctly the user's pass word, otherwise it is impossible to
ent er. At the state that t he cryptoguard is not locked, the user's password can be modified at any time, and t he
one finally input will be t he user's password. If F3. 00 is set as 0, t he user's password can be cancell ed; when
t he pow er is on, if F3.00 is not 0, parame ters are protected by password.
4. W hen modify parameter us ing seri al communicati on, usage of us er password al so abide above principle.
“ ”
“ ”
“ ”
“ ”
“ ”
“ ”
“※ ”
“● ”
“ ”
“ ”
“ ”
“ ”
“ ”
F4.08
**
Chapter 5 Function parameters list
- 21-
C hapter 5 Functio n Parame ters List
DZB Series
-2 2 -
Chapter 5 Function Parameters List
DZB Series
F0 Bas ic Function Parameters
Function
Code
Nam e
Settin g Range
Modi fi
ca tio n S erial
No
Default
Value
F0.13 AVR s election
0 Invalid
：
1 Valid all the ti me
：
1 13 .
※
F0.0 0 Contr ol mode 1 V/F control
：
1
F0.01
Runni ng Co mmand so urce
selecti on
0 Keyb oard
：
1 Te rmin al
：
2 485 Commu nication
：
0
F0.02
Keyboard and ter mina l
UP/DOW N s etting
1 Valid, and in verter does n ot
memoriz e when power down
：
2 Invalid
：
0
F0.03
Fr equency c ommand
Selection
0 Keyb oard
：
4 Multi-speed
：
5 PID control
：
6 485 Commu nication
：
1 Panle poten tiome ter V I
：
2 External terminal AI
：
3 Reserv ed
：
0
F0.04
Max im um outpu t freq uency
10.00 600.00Hz
～
5 0.00Hz
F0.05
Upper lim it frequenc y
F0.06 F0.04
～
5 0.00Hz
F0.06 Lower lim it frequenc y 0.0 0 Hz F0.05
～
0.00Hz
F0.07
Keyboard freq uency setting 0.00 Hz F0.04
～
5 0.00Hz
F0.08 ACCEL time 1 0.1 360.0s
～
10.0s
F0.09 DECEL time 1 0.1 360.0s
～
10.0s
F0.10
Operation d irec tion
selecti on
0 Operating at de fau lt directio n
：
1 Operating at r everse d irec tion
：
2 NO inv erse ope rating
：
2
F0.11
Carr ie r frequency setting
1.0 15.0kHz
～
S et by
model
F0.12
Fun ctiona l parameters
restoration
0 NO operation
：
1 Restore defaul t v alue
：
0
●
0.
1.
※
2.
3.
4.
5.
6.
7.
8.
9.
10 .
11.
12 .
●
※
※
※
※
※
※
※
●
●
●
2 Delete fai lure records
：
0 Valid, and in verter memoriz e
when po wer down
：
2 Invalid during deceleration
：
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT