background image

Full Spectrum Laser will replace or repair any defective parts free of charge within the first 30 

days. Ground shipping is free with overnight shipping available at extra charge.

Full Spectrum Laser will replace or repair any defective part within the warranty period free of charge 

but shipping charges are the responsibility of the customer. Warranty includes parts and labor only. 

Shipping of defective and replacement components is excluded.

The customer may arrange their own shipping. Parts can be dropped off at our warehouse free of 

charge.

All defective parts must be returned to Full Spectrum Laser for evaluation before replacements are 

issued, unless otherwise authorized. The warranty is valid for normal use only and excludes uses not 

stated in manual. Parts damaged by fires are considered user error if the machine is left unattended. 

Always stand next to the machine with a fire extinguisher and be ready to turn it off in case of an 

emergency. Never operate the machine unattended.

Products sold before 8/7/2012, had a 60-day base warranty on all items excluding shipping 

unless an extended warranty was purchased.

Our lasers have a 60-day full warranty and include a 1-year extended warranty. The 1-year extended 

warranty excludes shipping and consumable items. All electronic items (control cards, power supplies, 

motors) and most mechanical items are covered under the extended warranty unless damaged by 

abuse/fires. Consumables not covered include, but are not limited to, rubber parts (such as tubing, 

belts, plastic wheels, lenses, mirrors, other optics, and laser tubes).

The original purchaser may transfer the balance of the warranty to anyone free of charge provided we  

are notified in writing within 30 days.After 30 days, we will only provide warranty and tech support 

services to the original purchaser unless a warranty transfer fee.

Warranty will remain valid if product is sold. However, the buyer must request RMAs and repairs from 

the original purchaser unless a warranty transfer fee is paid.

NOTE: Full Spectrum Laser DOES NOT offer warranties or customer support for 3rd Party 

parts, including replacement laser tubes, as it may not be compatible with Full Spectrum 

Laser machines and can cause damage to your laser system.

Visit 

https://fslaser.com/terms

 for most current warranty postings.

Warranty

49

Содержание UV OPEN GALVO




































Отзывы: