Full Spectrum Laser MUSE MOPA, Руководство пользователя

Страница: 45 / 57

Section IX. Camera Functions
As Intel's most compact RealSense camera, t he D405 is a
short-range stereo camera that operates at an ideal range of 7
to 50cm. By combining RGB sensory data with image
processing software to provide sub-millimeter resolution and
accuracy. This camera is also equipped with a minimum object
detection down to 0.1mm at 7cm.
Camera Capture:
1. Enter RE3.
2. Place material in the laser bed.
3. Select the Camera Icon on RE3 or from the touchscreen. The workspace will be captured.
The Workspace can be cleared on RE3 using the arrow.
4. Align design to material. Run perimeter to double check your position.
5. You can now adjust your settings to run your job.
Camera Calibration:
Your camera is calibrated before shipping. The Camera Calibration should only be done when the camera has
been replaced or when instructed to do so by a support representative.
Preparation:
Before performing camera functions the focusing card must be within the view of the camera and outside of the
work area to perform the calibration properly. The size of the work area is determined by the lens used (refer to
the chart below).
Lens Size(mm) Working Area Approx. (mm)
163 110X110
210 140X140
254 175X175
330 220X220
420 300X300
44