Full Spectrum Laser MUSE MOPA, Руководство пользователя

Страница: 31 / 57

If your not sure what types of settings you want to use for your materials, then try using the Laser
Parameter Test under the Laser Tools page. The Parameters Test will form a graph to test the two parameters chosen
at their minimum and maximum, which spaces in between that depend on the grid size. This means that the larger
the grid size the easier it is to narrow down your selection. The parameters you can test are: Power, Speed,
Frequency, DPI, and Pulse Width. PulseWidth is a Parameter only use in MOPA machines. Enter the Setup page by
going to the Machine name, going to Diagnostics and selecting Galvo Calibration. Then select the Parameters tab.
Selecting the Options button will open the Options window.
Here you will adjust the grid settings, such as the grid size,
square size, and default settings.
30
Laser Parameter Test
Section VI. Operations