Full Spectrum Laser MUSE MOPA, Руководство пользователя

Страница: 25 / 57

Focusing must be done each time a new material is selected or when restarting your machine.
Auto-focus:
Your Galvo came with a black anodized QR card that can be placed on top of your material
under the laser head (see Fig. 22).
Fig. 22
Note: Make sure the QR code is visible on the camera during focusing.
2. In RE3, go to the top right section of your browser and locate the jog Controls.(See Fig. 23)
Fig. 23
3. Select the Jog Control arrow to open menu and select the Z autofocus button.(See Fig. 24)
Fig. 24
4. The lens will move into ideal position for the selected material
Section V. Focusing Your Laser
24