2 9 5 Electrical connections
on the outdoor unit side
Access to the connection terminals.
-Remove the front panel. Remove the screws and the
front panel.
-Make the connections in accordance with the
diagram(s) (
figure 37, page 26
).
-Use cable clamps to prevent the conductors from
being disconnected accidentally.
-Fill in the space where the cables enter the outdoor
unit with the insulating plate.
Figure 31 - Access to outdoor unit’s terminal block
Remove the screws
and push downwards
Front panel
Terminal
block
Figure 32 - Finalisation of connection
to outdoor unit
Cable
clamps
Cables
(supply and
interconnection)
Front
Underneath
Lateral side
Back
Figure 33 - Location of electrical cables and
refrigeration connections to outdoor unit
Figure 34 - Connections to outdoor unit’s terminal block
Terminal
block
Interconnection between
the outdoor unit and the
hydraulic unit
General electrical
supply
Installation and operating manual "1364 - EN"
Heat pump split single service 3 phase
- 24 -
