• Water may drain away from the outdoor unit when it
is operating. Do not install the appliance on a paved
terrace ; choose a well-drained place (e.g. gravel
or sand). If the installation is in an area where the
temperature can be lower than 0°C for a long period,
check that the presence of ice does not present any
danger. A drainage pipe can also be connected to the
outdoor unit (see
figure 12, page 14
).
• Nothing should obstruct the air circulation through the
evaporator and from the fan.
• Keep the outdoor unit away from heat sources and
inflammable products.
• Make sure the appliance not disturb the surrounding
area or users (noise level, draught generated, low
temperature of the air being blown out, with the risk of
freezing plants in its path).
• The surface supporting the outdoor unit should:
- be permeable (soil, gravel, etc),
-support its weight easily,
-provide a solid fixing and
-not transmit any vibration to the dwelling.
• Anti-vibratory blocks are available, please consult your
retailer.
1000 mm
ou plus
200 mm
300 mm
200 mm
1000 mm ou plus
150 mm
150 mm
300 mm
Max. 500 mm
1000 mm
1500 mm
250 mm
250 mm
500 mm
Max. 500 mm
1500 mm ou plus
300 mm
500 mm
1500 mm ou plus
1500 mm
500 mm
Max. 300 mm
1500 mm
Figure 11 - Minimum installation clearances around outdoor unit
or more
or more
or more
or more
Installation and operating manual "1364 - EN"
- 13 -
Heat pump split single service 3 phase
