Appendix A
Fixed Issues
103
6718841
Sun Explorer may fail to collect the ILOM data
(Tx000). If failed, it may take more than 30 minutes
to return an error.
Note - Fixed in System Firmware 7.2.2.e or later.
You can collect the ILOM data (Tx000) in another
way.
For details, see
“Sun Explorer May Fail to Collect the
ILOM Data (Tx000) (CR 6718841)” on page 104
.
6701972
Even when the "SSH Server" setting is changed from
"Disabled" to "Enabled" on the "SSH Server" tab on
the ILOM Web interface, "Disabled" is still
displayed.
The "SSH Server" setting is valid.
Note - Fixed in System Firmware 7.2.2.e or later.
Refresh the page information by clicking the "Refresh"
button on the ILOM Web interface.
6694693
ILOM allows only two privileges: Administrator and
Operator. Therefore, the following text about the
ALOM CMT
userperm
command in the manual is
inappropriate.
If one of [c], [u], [a], and [r] is set, Administrator
authority will be in effect. If nothing is specified,
Operator authority will be in effect.
<
Integrated Lights Out Manager 2.0 Supplement
>
userperm [
username
] [c][u][a][r]
Note - Fixed in System Firmware 7.2.2.e or later.
None.
6656116
If the DIMM module fails, the MCU will be
disconnected, and an error message might be output
to the console.
For an example of the message, see
Disconnected in DIMM Module Failure (CR
6656116)” on page 106
.
Note - Fixed in System Firmware 7.2.2.e or later.
Identify and replace the faulty DIMM module.
6586305
Using the SP
setdate
command (ALOM
compatibility shell) after having configured non-
default logical domains can cause the date on non-
default domains to change.
Note - Fixed in System Firmware 7.2.2.e or later.
Use the
setdate
command to configure the date on
the SP before configuring and saving logical domain
configurations.
If you use
setdate
after non-default logical domain
configurations have been saved, each non-default
domain must be booted to Solaris OS and the date
corrected. (See
date
(1) or
ntpdate
(1M).)
6579390
After disabling a DIMM, the OpenBoot PROM
banner does not show a decrease in the amount of
memory.
Note - Fixed in System Firmware 7.2.2.e or later.
If you manually disable any CPU or memory resource
with the ASR commands while the host is powered on,
you must power cycle the host to complete the
disabling of the resource.
After the power cycle, the resource will be disabled,
and the proper information will be displayed in the
banner.
TABLE A-9
Issues Fixed in System Firmware 7.2.2.e or Later
(Continued)
CR ID
Description
Workaround
Содержание SPARC Enterprise T5140
