Fujitsu PSWITCH 2048P Скачать руководство пользователя страница 207

Страница: 207 / 218

User’s Guide

FUJITSU PSWITCH

December/2018

207

4. INABILITY TO COMPLY DUE TO STATUTE OR REGULATION

If it is impossible for You to comply with any of the terms of this License with

respect to some or all of the Covered Code due to statute or regulation then You

must: (a) comply with the terms of this License to the maximum extent possible;

(b) cite the statute or regulation that prohibits you from adhering to the license;

and (c) describe the limitations and the code they affect. Such description must be

included in the LEGAL file described in Section 3.4 and must be included with all

distributions of the Source Code. Except to the extent prohibited by statute or

regulation, such description must be sufficiently detailed for a recipient of ordinary

skill to be able to understand it. You must submit this LEGAL file to Red Hat for

review, and You will not be able use the covered code in any means until

permission is granted from Red Hat to allow for the inability to comply due to

statute or regulation.

5. APPLICATION OF THIS LICENSE

This License applies to code to which the Initial Developer has attached the notice

in Exhibit A, and to related Covered Code.

Red Hat may include Covered Code in products without such additional products

becoming subject to the terms of this License, and may license such additional

products on different terms from those contained in this License.

Red Hat may license the Source Code of Red Hat Branded Code without Red Hat

Branded Code becoming subject to the terms of this License, and may license Red

Hat Branded Code on different terms from those contained in this License. Contact

Red Hat for details of alternate licensing terms available.

6. VERSIONS OF THE LICENSE 6.1. New Versions. Red Hat may publish revised

and/or new versions of the License from time to time. Each version will be given a

distinguishing version number.

6.2. Effect of New Versions. Once Covered Code has been published under a

particular version of the License, You may always continue to use it under the

terms of that version. You may also choose to use such Covered Code under the

terms of any subsequent version of the License published by Red Hat. No one other

than Red Hat has the right to modify the terms applicable to Covered Code beyond

Содержание PSWITCH 2048P



























































































































































































































Результаты поиска

Содержание PSWITCH 2048P

Отзывы:

Бренды по названию

Популярные бренды

Fujitsu PSWITCH 2048P, Руководство пользователя

Результаты поиска

Содержание PSWITCH 2048P

Отзывы:

Бренды по названию

Популярные бренды