Fujitsu PSWITCH 2048P Скачать руководство пользователя страница 132

Страница: 132 / 218

FUJITSU PSWITCH

User’s Guide

132

December/2018

3.1.9.14.5.

RIPng (RIP for IPv6)

IPv6 RIP has the same function as IPv4 RIP and provides the same advantages. The

IPv6 RIP extension detailed in RFC 2080 includes support for IPv6 addresses and

prefixes, and the use of the full RIP device multicast group address

FF02::9

as the

destination address of the RIP update message.

In the software implementation of IPv6 RIP of this product, each IPv6 RIP process

manages a local routing table called a routing information database (RIB). The

IPv6 RIP RIB contains a set of optimal cost IPv6 RIP routes learned from all adjacent

network devices. If IPv6 RIP learns the same route from two different neighbors

and the cost is different, only the route with the lowest cost will be stored in the

local RIB.

3.1.9.14.6.

Filtering IPv6 RIP Routing Updates

Route filtering using distribution lists controls routes that RIP receives and

advertises. This control is performed globally or per interface.

Filtering is controlled by the IPv6 distribution list. Input distribution lists control

route reception, and input filtering is applied to advertisements received from

neighbors. Only routes that pass input filtering are inserted into the RIP local

routing table and become candidates for insertion into the IPv6 routing table.

The output distribution list controls route advertisements. Output filtering is

applied to route advertisements sent to neighbors. Only routes passing through

output filtering are advertised.

3.1.9.15.

OSPF (Open Shortest Path First)

3.1.9.15.1.

OSPF version 2 (IPv4)

This product supports the following features:



OSPF version 2 (RFC 2328) except for non-broadcast multi-access (NBMA)

interface or point-to-multipoint interfaces.



Not-so-stubby areas (RFC 3101) and external LSA overflow (RFC 1765).



Opaque LSA (RFC 2370) flooding, without generating and analyzing.



Stub router advertisement (RFC 3137). It becomes a stub router automatically

when OSPF cannot calculate the complete routing table due to resource

limitations. Also, network administrators can manually configure OSPF to act as

Содержание PSWITCH 2048P



























































































































































































































Результаты поиска

Содержание PSWITCH 2048P

Отзывы:

Бренды по названию

Популярные бренды

Fujitsu PSWITCH 2048P, Руководство пользователя

Результаты поиска

Содержание PSWITCH 2048P

Отзывы:

Бренды по названию

Популярные бренды