Fujitsu PRIMERGY TX150 S8, Руководство по модернизации и обслуживанию, Страница: 84 / 430

84 Upgrade and Maintenance Manual
TX150 S8 / TX200 S7
Basic software procedures
Ê
Burn the image to a DVD.
Ê
In order to create a bootable USB stick, please proceed as described in
the "Local System Update for PRIMERGY Servers" user guide.
Ê
Before using the ServerView Update DVD or USB stick in an offline
environment, properly shut down the server and disconnect all external I/O
connections (like LAN, FC or SAS cables) from the system. Only keep
mouse, keyboard, video cable and AC power cord connected.
I
Ensure that all external I/O connections are uniquely identified so that
you can reconnect them into their original locations after concluding
the task.
To start Update Manager Express from the (physical) Update DVD or from a
USB stick, proceed as follows:
Ê
Prepare your Update DVD or USB stick as described in the "Local System
Update for PRIMERGY Servers" user guide.
Ê
Boot the server from the prepared Update DVD or USB stick:
DVD:
Ê
Switch on the server.
Ê
Right after switching on the server, insert the Update DVD into the
DVD drive and close the tray.
USB:
Ê
Connect the USB stick to the server.
Ê
Switch on the server.
If the server does not boot from DVD or USB stick, proceed as follows:
Ê
Reboot the server, e.g. by pressing the reset button on the front or
switching the server off and then on again after a few seconds.
Ê
Once the server has been started, press
[F12]
to enter the boot menu.
Ê
Use the
Ê
and
Ë
cursor keys to select your DVD drive or USB stick as
boot device and press
[ENTER]
.
The server will now boot from the Update DVD or USB stick.
Ê
After the boot process is complete, select your preferred GUI language.
The Update Manager Express main window will be displayed.
Ê
Finish the intended maintenance task.
I
For further information, refer to the "Local System Update for
PRIMERGY Servers" user guide.