Fujitsu PRIMERGY TX150 S8, Руководство по модернизации и обслуживанию, Страница: 26 / 430

26 Upgrade and Maintenance Manual
TX150 S8 / TX200 S7
Before you start
Please contact your local Fujitsu customer service partner for details on how to
order expansion kits or spare parts. Use the Fujitsu Illustrated Spares Catalog
to identify the required spare part and obtain technical data and order
information. Illustrated Spares catalogs are available online at
http://manuals.ts.fujitsu.com/illustrated_spares (global market only).
Replacing a defective component
The global error indicators on the front and rear sides of the server as well as
local diagnostic LEDs on the front panel report defective hardware components
that need to be replaced. For further information on the controls and indicators
of your server, refer to the operating manual of your server and section
"Connectors and indicators" on page 419 .
If the system has been powered off in order to replace a non-hot plug unit, a
system of PRIMERGY diagnostic indicators guides you to the defective
component. The "Indicate CSS" button enables the indicator next to the
defective component even if the server has been switched off and disconnected
from the mains. For further information, please refer to sections
"Using
diagnostics information" on page 47 and "Connectors and indicators on the
front panel" on page 426 .
If the defective component is a customer replaceable unit included in the CSS
concept (Customer Self Service, only available for global market), the CSS
indicators on the front and rear side of the server will light up.
It is recommended to prepare local maintenance tasks using remote diagnostics
procedures, as described in the "ServerView Suite Local Service Concept
(LSC)" manual.