Fujitsu Primergy RX600 S2, Руководство пользователя

Страница: 35 / 299

35
PRIMERGY RX600 S2 User’s Guide
1
Overview
■
Cautions when Turning the Power Off
If you press the power switch for four seconds or more, the server turns off forcedly. If you press the
power switch for four seconds or more while the OS is running, the server turns off without performing
the shutdown process, which may lead to the destruction of hard disk data. Do not press the power
switch for four seconds or more while the OS is running.
●
When the OS is Windows Server 2003 or Windows 2000 Server
• For Windows Server 2003
"Do Nothing", "Prompt Input", "Standby", "Hibernation", or "Shutdown" can be specified as the
operating mode of the power switch in the OS settings (normally, "Shutdown" is specified).
• For Windows 2000 Server
"Standby", "Hibernation", or "Power Off" can be specified as the operating mode of the power switch
in the OS settings (normally, "Power Off" is specified).
On this server, functions corresponding to "Standby" and "Hibernation" are supported as BIOS and
hardware functions. However, some drivers and software installed in the server do not support these
functions. For this reason, functions corresponding to "Standby status" and "Hibernation status" are
unavailable on this server.
When the operating mode is set to "Standby" or "Hibernation", the system may operate improperly or
hard disk data may be corrupted. For details about operating mode settings, refer to the OS manual.