Fujitsu Primergy RX600 S2 Скачать руководство пользователя

Страница: 119 / 299

119

PRIMERGY RX600 S2 User’s Guide

Manu

al O
S

allation

2. When the "Please insert the disk labeled Manufacturer-supplied hardware support

disk into Drive A:" message appears, insert the driver disk created from the driver’s

CD and press the [Enter] key.

The following message appears.

3. Select following item and press the [Enter] key.

4. When the following message appears, press the [S] key.

Follow the instructions from the setup program to continue the installation

procedure.

If a message indicating that the driver has not passed Windows Logo testing to verify its

compatibility with Windows appears, select [Yes] to continue the installation procedure.

Install the ChipSet driver.

1. Insert the ServerStart CD-ROM into the drive of the server.

When the ServerStart window appears, exit ServerStart.

2. Execute the following command on the ServerStart CD-ROM.

[CD-ROM drive] :\DRV\ChipSet\Intel\General\W32\infinst_autol.exe

The installation wizard starts up.

3. Click [Next]. Follow instructions in the window to perform installation.

4. When the "Intel(R) Chipset Software Installation Utility is complete." message

appears, eject the ServerStart CD-ROM from the CD-ROM drive and click [Finish]

to restart the system.

Install the LAN driver.

Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more

details, refer to "4.3 Installing the LAN Driver" (

pg.126).

Install the SAF-TE driver.

1. Insert the ServerStart CD-ROM into the drive of the server.

When the ServerStart window appears, exit ServerStart.

2. Click [Start]

→

[Administrative Tools]

→

[Computer Management].

3. Click [Device Manager].

4. Double-click [TOSHIBA SAF-TE SCSI Processor Device] under [System devices].

The properties window appears.

You have chosen to configure a SCSI Adapter for use with

Windows, using a device support disk provided by an

adapter manufacturer.

Select the SCSI Adapter you want from the following list,

or press ESC to return to the

previous screen.

Mega RAID SCSI 320-2E RAID Controller Drive

The driver you provided seems to be newer than the Win-

dows default driver.

Setup will load support for the following mass Storage

device(s):

Mega RAID SCSI 320-2E RAID Controller Driver

Содержание Primergy RX600 S2












































































































































































































































































































Результаты поиска

Содержание Primergy RX600 S2

Отзывы:

Похожие инструкции для Primergy RX600 S2

Бренды по названию

Популярные бренды

Fujitsu Primergy RX600 S2, Руководство пользователя

Результаты поиска

Содержание Primergy RX600 S2

Отзывы:

Похожие инструкции для Primergy RX600 S2

Бренды по названию

Популярные бренды