Fujitsu Primergy RX600 S2, Руководство пользователя

Страница: 17 / 299

17
PRIMERGY RX600 S2 User’s Guide
1
Overview
●
Configuration File (SerStartBatch.ini)
A configuration file stores the server setup information configured in ServerStart. To create a
configuration file, use the ServerStart floppy disk supplied with this server. Store only one file on each
floppy disk. Do not set the ServerStart floppy disk to the write-protected state.
You can use any name for the configuration file. However, the file must be installed in the server as
"SerStartBatch.ini". When installing the configuration file, make sure to save it as "SerStartBatch.ini" on
the ServerStart floppy disk.
Start up ServerStart, insert the ServerStart floppy disk containing "SerStartBatch.ini", and click [Start] to
install the server.
■
Intuitive User Interface
The intuitive user interface allows you to easily set the necessary information.
●
Main Window
When ServerStart is started, the following window appears. The window and tool bar differ depending
on the mode.