Fujitsu PRIMEPOWER 800, Руководство пользователя

Страница: 76 / 145

48 C120-E093-04EN
CHAPTER 5 Main Unit Operator Panel Operation
5.3.4 Partition Messages
Figure 5.7 shows the operator panel status and Table 5.8 lists the messages displayed on the
operator panel when any partition is selected (the cursor points to anywhere between 0 to e).
Figure 5.7 Partition Messages
*) The message "Panic" states the partition OS went into a panic state. The OS automatically
restarts after a certain period of time. When a startup process begins, the message "Boot
Process" is displayed.
Table 5.8 Partition Messages
Symbol Display data Contents Message details
0 to e (No display) Power is off. ---
Initialize Phase Initializing hardware. ---
OBP Complete OBP is completed. ---
Boot Process OS is booting up. ---
System Running OS is on running. ---
Shutdown Started Shutdown is started. ---
Panic (*) A panic has occurred in the OS. ---
SB#xx alarm An alarm was generated at
System Board #xx in the partition.
xx: System Board slot number
SB#xx warning A warning was generated at
System Board #xx in the partition.
xx: System Board slot number
CPU Hangup 0000 Indicates the abnormality that the
POST cannot be started up.
0000: Fixed.
CPU Hangup xxyy Indicates abnormality of the Alive
Check of the CPU.
xx: Monitoring object code
01: POST
02: OBP
03: SCF driver
yy: Monitoring phase code
Indicates the monitoring phase
code at the occurrence of an
abnormality.
!
"
#$ %&
'#$# ($$ ) $ *