Fujitsu MHR2010AT, Руководство по эксплуатации продукта

Страница: 19 / 250

Contents
C141-E145-02EN xv
Figure 5.1 Interface signals 5-2
Figure 5.2 Execution example of READ MULTIPLE command 5-21
Figure 5.3 Read Sector(s) command protocol 5-107
Figure 5.4 Protocol for command abort 5-108
Figure 5.5 WRITE SECTOR(S) command protocol 5-110
Figure 5.6 Protocol for the command execution without data transfer 5-111
Figure 5.7 Normal DMA data transfer 5-114
Figure 5.8 Ultra DMA termination with pull-up or pull-down 5-126
Figure 5.9 PIO data transfer timing 5-127
Figure 5.10 Multiword DMA data transfer timing (mode 2) 5-128
Figure 5.11 Initiating an Ultra DMA data in burst 5-129
Figure 5.12 Sustained Ultra DMA data in burst 5-133
Figure 5.13 Host pausing an Ultra DMA data in burst 5-134
Figure 5.14 Device terminating an Ultra DMA data in burst 5-135
Figure 5.15 Host terminating an Ultra DMA data in burst 5-136
Figure 5.16 Initiating an Ultra DMA data out burst 5-137
Figure 5.17 Sustained Ultra DMA data out burst 5-138
Figure 5.18 Device pausing an Ultra DMA data out burst 5-139
Figure 5.19 Host terminating an Ultra DMA data out burst 5-140
Figure 5.20 Device terminating an Ultra DMA data out burst 5-141
Figure 5.21 Power-on Reset Timing 5-142
Figure 6.1 Response to power-on 6-3
Figure 6.2 Response to hardware reset 6-4
Figure 6.3 Response to software reset 6-5
Figure 6.4 Response to diagnostic command 6-6
Figure 6.5 Sector slip processing 6-10
Figure 6.6 Alternate cylinder assignment processing 6-11
Figure 6.7 Data buffer structure 6-12