manualshive.com logo in svg

Fujitsu MB90460 Series, Руководство по оборудованию, Страница: 299 / 739

Поделиться
Скачать
Fujitsu MB90460 Series Скачать руководство пользователя страница 299

280

CHAPTER 14  MULTI-FUNCTIONAL TIMER

14.1

Overview of Multi-functional Timer

The multi-functional timer consists of a 16-bit free-run timer, six 16-bit output compare, 
four 16-bit input capture, 1 channel of 16-bit PPG timer and a waveform generator. By 
using this waveform generator, 12 independent waveform can be outputted through 16-
bit free-run timer. Furthermore input pulse width measurement and external clock cycle 
measurement can be done.

■

16-bit Free-run Timer (

×

 1)

•

The 16-bit free-run timer consists of a 16-bit up/up-down counter, control register, 16-bit compare clear

register (with buffer register) and a prescaler.

•

8 types of counter operation clock (

φ

, 

φ

/2, 

φ

/4, 

φ

/8, 

φ

/16, 

φ

/32, 

φ

/64, 

φ

/128) can be selected (

φ

 is the

machine clock).

•

Compare clear interrupt is generated when there is a compare match with compare clear register and 16-

bit free-run timer. Zero detection interrupt is generated while 16-bit free-run timer is detected as zero in

count value.

•

The compare clear register has a selectable buffer register, into which data is written for transfer to the

compare clear register. When the timer is stopped, transfer occurs immediately when the data is written

to the buffer. When the timer is operation, data transfer from the buffer occurs when the timer value is

detected to be zero.

•

Reset, software clear, compare match with compare clear register in up-count mode will reset the

counter value to "0000

H

".

•

The output value of this counter can be used as the count clock of the output compares and input

captures in multi-functional timer.

■

16-bit Output Compare (

×

 6)

•

The output compare consists of six 16-bit compare registers (with selectable buffer register), compare

output latch and compare control registers. An interrupt is generated and output level is inverted when

the value of 16-bit free-run timer and compare register are matched.

•

6 compare registers can be operated independently.

Output pins and interrupt flag are corresponding to each compare register.

•

2 compare registers can be paired to control the output pins.

Inverts output pins by using 2 compare registers together.

•

Setting the initial value for each output pin is possible.

•

An interrupt is generated when output compare register is matched with 16-bit free-run timer.

Содержание MB90460 Series




































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов