Fujitsu M10 Series, Примечания к продукту

Страница: 176 / 216

Table 3-22 Problems that might occur in any versions of Oracle Solaris and workarounds (continued)
SPARC M10-
Bug 1 4 4S Description Workaround
19424242 x x x On a system to which Oracle VM Server
for SPARC 3.1.0.1 or later is applied, the
following event may occur: If all CPUs or
memory in an I/O domain are degraded
due to a CPU or memory failure, the
ldmd service abnormally terminates and,
as a result, the ldm(1M) command
terminates with an error.
This has been modified with SRU11.2.8
and Oracle VM Server for SPARC 3.2 for
Oracle Solaris 10.
[How to restore]
Replace the faulty CPU or memory.
If you want to boot Oracle Solaris while
leaving the faulty CPU or memory
installed, perform the following
procedure on the XSCF:
1. Execute the poweroff(8) command to
power off the physical partition (PPAR).
2. Execute the setdomainconfig(8)
command to place the PPAR in the
factory-default state.
XSCF>
setdomainconfig -p
ppar_id
-c
default
3. Execute the poweron(8) command to
activate the PPAR.
Oracle Solaris reboots in a configuration
that includes only the control domain
(factorydefault).
19424359 x x x If the domain configuration is restored in
the degraded configuration, both of the
following settings are reset to their
default values: the setting specifying
whether to enable/disable hypervisor
dump collection and the setting
specifying whether to enable/disable
automatic reboot during hypervisor
dump collection.
[Default values]
Hypervisor dump collection: Enabled
Automatic reboot during hypervisor
dump collection: Disabled
This has been modified with SRU11.2.8
and Oracle VM Server for SPARC 3.2 for
Oracle Solaris 10.
[How to restore]
After executing the ldm(1M) command to
change the hypervisor dump setting,
save the domain configuration
information.
#
ldm set-hvdump hvdump=
XXXX
hvdump-reboot=
YYYY
#
ldm add-spconfig
ZZZZ
After replacing the faulty component,
execute the setdomainconfig(8)
command to initiate a reboot with the
original domain configuration.
19513561 x x x The ldmd(1M) daemon may repeat core
dump if a suspend process of the
appropriate domain fails during live
migration.
This has been modified with SRU11.2.8
and Oracle VM Server for SPARC 3.2 for
Oracle Solaris 10.
[How to restore]
Restart the physical partition according
to the following steps.
1. Execute the poweroff(8) command to
power off the physical partition (PPAR).
2. Execute the poweron(8) command to
restart PPAR.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240
･
March 2015 162