Fujitsu Lifebook P1510, Руководство пользователя

Страница: 5 / 218

Copyright
v
AUSTRALIAN WARNINGS
WARNING
FOR SAFETY REASONS, ONLY
CONNECT EQUIPMENT WITH A
TELECOMMUNICATIONS COMPLIANCE
LABEL. THIS INCLUDES CUSTOMER
EQUIPMENT PREVIOUSLY LABELLED
PERMITTED OR CERTIFIED.
Connection of Non Certified/Approved
peripherals may result in the equipment
operating outside the Australian EMI
Standards.
Modems connected to the Australian
telecommunications network must be
operated in accordance with the Labelling
Notice. This modem has been specifically
configured to ensure compliance with the
ACA Standards. Do not adjust your modem
or software outside the values indicated
below. To do so would result in your modem
being operated in a non-compliant manner.
Call Attempts/Retries:
Applications software shall be configured
so that no more than 3 attempts are made
to establish a connection to a given number
(Note: if the modem can detect service
tones, up to 10 attempts can be made). If
the call sequence is unsuccessful, there
shall be a delay of at least 30 minutes
before attempting to call the number again.
Failure to set the modem and any
application software used with the modem,
to the values shown above will result in the
modem being operated in a non-compliant
manner.
Consequently, this would be in violation of
the Labelling Notice for this equipment and
the Telecommunications Act 1997
prescribes penalties for the connection of
non-compliant equipment.
P Series.book Page v Thursday, August 4, 2005 11:02 AM