Fujitsu Lifebook E330, Руководство пользователя

Страница: 98 / 218

S e c t i o n F o u r
84
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu -/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Advanced
Item Specific Help
Serial port A: [ Enabled ]
Base I/O address: [3F8]
Interrupt: [IRQ 4]
Serial port B: [Enabled]
Mode: [FIR]
Base I/O address: [2E8]
Interrupt: [IRQ 3]
Base I/O address: [118]
DMA channel: [DMA 3]
Parallel port: [Enabled]
Mode: [Bi-directional]
Base I/O address: [378]
Interrupt: [IRQ 7]
Floppy disk controller: [Enabled]
Local Bus IDE adapter: [Both]
Configure serial port A
using options:
[Disabled]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
I/O Device Configuration
Figure 4-5 I/O Device Configuration Submenu
C A U T I O N
I/O addresses, DMA channels and
Interrupt levels can be entered in various
ways, including via the BIOS setup utility,
the control software for the I/O device, or
the hardware. If any two ports or devices,
serial or parallel, have the same I/O
address assigned your notebook will not
function normally. Please keep a record
of original settings before making any
changes in the event that a restoration is
required. See your hardware and software
documentation as well as the setup utility
to determine settings, limitations, etc.
I/O Device Configuration Submenu
of the Advanced Menu
The I/O Device Configuration submenu
provides the ability to set the I/O addresses and
interrupt levels for the parallel and serial ports,
and disk drive controllers of your notebook.
Follow the instructions for Navigating
Through the Setup Utility to make any changes.
(See page 71.)
G Four Configuring.qxd 10/28/98 10:20 AM Page 84