background image

S e c t i o n   F o u r

72

PhoenixBIOS Setup Utility

F1

Help

ESC

Exit

Select Item
Select Menu

-/Space 

Change Values

 

  Enter 

Select   Sub-Menu

  F9

Setup Defaults

 F10

Save and Exit

▲ 

Main

    Advanced    Security    Power    Boot

Info

Exit

Item Specific Help

<Tab>, <Shift-Tab>, or
<Enter> selects field.

System Time:

[

14

:57:01]

System Date:

[08/10/1998]

Legacy Diskette A:

[1.44/1.25 MB 3

1

/

2

"]

Primary Master

[FUJITSU MHD2032AT]

Secondary Master     

[UJDA150]

Secondary Slave

[LS-120 SLIM  01]

System Memory:

640 KB

Extended Memory:

 31 MB

Memory Cache

Language:

[English (US)]

Figure 4-1 Main Menu

MAIN MENU – SETTING
STANDARD SYSTEM PARAMETERS

The Main Menu allows you to set or view the
current system parameters. Follow the instruc-
tions for Navigating Through The Setup Utility
to make any changes.

(See page 71.)

Table 4-1 shows the names of the menu fields
for the Main menu, all of the options for each
field, the default settings and a description of
the field’s function and any special information
needed to help understand the field’s use.

P O I N T

System Time and System Date can
also be set from your operating system
without using the setup utility. Use the
calendar and time icon on your Windows
Control panel or type time or date from
the MS-DOS prompt.

G Four Configuring.qxd  10/28/98  10:20 AM  Page 72

Содержание Lifebook E330



























































































































































































































Отзывы: