Fujitsu Lifebook E330, Руководство пользователя

Страница: 145 / 218

Five
U s e r I n s t a l l a b l e F e a t u r e s
L i f e B o o k E S e r i e s f r o m F u j i t s u
131
3. Slide the module toward the back of your
notebook until it clicks into place.
Removing a Device in Multi-function
Bay 1 or 2 Using Tioman Hot Swap.
1. Close any open files on the removable
device(s) that you plan to eject from
the computer.
2. Right-click on either ‘Tioman Taskbar Icon’
to display its menu.
Figure 5-3 Removing and Installing a
Device in Multi-function Bay 2
3. Select the ‘Swap Devices’ menu.
4. The ‘Agate Tioman’ window will pop up and
display the following message:
It is now
safe to remove and insert
devices in either Multi-func-
tion Bay. After you have com-
pleted device swapping, click
the OK button.
5. Slide the release latch at the left rear corner of
the Multi-function Bay toward the outer edge
of your notebook.
6. Slide the device forward until the unit is clear
of the compartment. This will require some
force. Use the finger ridge on the bottom of
the device.
Installing a Device in Multi-function
Bay 1 or 2 Using Tioman Hot Swap
1. Orient the item to be installed with the finger
ridge away from the body of your notebook
and the connector toward the body of
your notebook.
2. With the module connector toward the back
of your notebook align the grooves on the
side of the device with the tracks in the side
of the bay. (
Figure 5-3. )
3. Slide the module toward the back of your
notebook until it clicks into place.
4. Press the ‘OK’ button to continue.
5. The software will automatically detect the
new devices and place them online.
H Five UserInstallable.qxd 10/28/98 10:26 AM Page 131